Paper vs. Mesh Drywall Tape: Which One Should You Use?

While it largely depends on personal preference, here are some factors to consider when deciding between paper vs. mesh drywall tape.

Tuoxin supply professional and honest service.

Family Handyman

Chances are you&#;ve seen paper and fiberglass mesh drywall tape on the shelves of your local home improvement store. What&#;s the difference? To help you choose the better tape for your application, we&#;ll look at three factors: adhesion, strength/flexibility and moisture resistance.

Adhesion

Mesh drywall tape has a tacky backing, allowing it to stick to the wall on its own. Paper tape needs to be embedded in a layer of joint compound. This makes mesh tape easier for the average DIYer to install on a flat length of wall.

Most paper tape also comes with a factory crease in the center. This allows the installer to fold the tape in half, forming a right angle that makes it extremely easy to cover inside or outside corners.

It&#;s possible to fold mesh tape, but it&#;s easy to get off center if done by hand. To apply mesh tape on corners, use a specialty mesh tape corner applicator and hit it with setting compound immediately. Of course, metal-reinforced paper tape makes for an even easier installation process and a resilient corner!

Strength and Flexibility

Hold both kinds of tape in your hand and you might think they bend the same. But the paper tape firms up dramatically after being embedded in mud, a little like papier-mâché.

This added strength makes paper tape an especially good choice for butt joints. If you prefer mesh tape, skip the standard joint compound and use a setting mud, which dries firmer and provides additional strength.

Moisture Concerns

Mesh tape, crafted from fiberglass, holds distinct advantages, particularly in environments where moisture is a concern. Its inherent mold-resistant properties make it an excellent option for areas prone to dampness, such as bathrooms and backsplashes. Given its resilience against the potential damage caused by water exposure, mesh tape proves to be a reliable solution in these situations.

Furthermore, the utility of mesh tape extends to specific applications like tile installations. When preparing backer boards for tiling projects, it&#;s essential to select an approved fiberglass tape. Mesh tape&#;s compatibility with these scenarios is noteworthy, as it aligns with the durability required for tile work. Its reinforced structure not only aids in preventing cracks and crevices but also ensures that the installation maintains its integrity over time, resulting in a sturdy foundation for the subsequent tile layers.

For more information, please visit Bulk Supply Fiberglass Wallboard Tape, Drywall Tape Fiberglass.

In essence, the mold-resistant qualities and adaptability of mesh tape, particularly in moisture-prone environments and tile installations, make it a pragmatic choice that contributes to the longevity and reliability of the overall construction project.

Conclusion

In general, paper drywall tape is slightly stronger and more versatile, but mesh tape has a more manageable learning curve and better moisture resistance. It comes down to personal preference: Use the tape you&#;re most comfortable with.

Paper Drywall Tape

&#; Because paper tape is without adhesive, it must be embedded in a layer of joint compound to stick to the drywall surface. This is easy enough to do, but if you&#;re not careful to cover the entire surface with compound and then to squeeze it out evenly, air bubbles will form under the tape.

Fiberglass-Mesh Drywall Tape

&#; Fiberglass-mesh tape is self-adhesive, so it doesn&#;t need to be embedded in a layer of compound. This speeds up the taping process and ensures that the tape will lie flat on the drywall surface. It also means that you can apply the tape to all seams in a room before putting on the first coat of compound.

&#; Although stronger than paper tape in ultimate load, mesh tape is more elastic, so joints are more likely to develop cracks.

&#; Mesh tape should be covered with setting-type compound, which is stronger than drying type and will compensate for fiberglass mesh&#;s greater elasticity. After the initial coat, either type of compound can be used.

&#; With patches, where joint strength is not as much of a concern as with a full sheet, mesh tape allows for a faster fix.

Whatever do you need, welcome to contact us for free.

https://www.hebeiboxian.com

Are you interested in learning more about Fiberglass Mesh Drywall Tape? Contact us today to secure an expert consultation!