Installing vinyl corner bead is quick and easy. Here&#;s how to do it.
If you are looking for more details, kindly visit huili.
Cut the corner bead to length using snips or heavy-duty scissors. As with other beads, it should sit 1/2 in. above the floor to prevent cracking if the building settles.
Where corner beads meet, cut back the flanges to prevent overlaps. Dry-fit to verify lengths and angles are correct.
Make sure all surfaces are clean and free of dust before installing the corner bead. To install, spray adhesive to both sides of the corner, moving steadily to get an even coat. Check the instructions on the can to see how far away to hold the spray nozzle from the surface.
Apply adhesive to the inside of the bead in a similar fashion.
Contact us to discuss your requirements of pvc beads. Our experienced sales team can help you identify the options that best suit your needs.
Once the adhesive is tacky, install it on the corner, and apply pressure along the entire length of both flanges to bond the adhesive. A spackling knife or roller can help with this process.
Once the adhesive cures&#;usually within about half an hour&#;the bead is ready for drywall compound.
So, now that you&#;ve learned how to install vinyl corner bead, you may ask: why should you choose this corner bead over the more traditional, metal kind you might find in your everyday home-improvement store? We&#;ve got some thoughts on that subject, but we&#;ll let Drywall Shorty herself handle that question. As she told us when she visited Trim-Tex HQ in September :
&#;Metal is hard to repair. If it gets damaged or it gets dented or dinged, you're usually having to pull out the whole stick. The way that metal is installed is, usually we use an inch-and-a-quarter staples, so it goes all the way down into the framing. When you're having to come back and repair metal, it's a very lengthy process because you're having to pull it off, then you're having to put it back on. Then usually metal corner bead takes three to four coats to get it completely full, so then you have more time spent on making sure that product is finished. It's just it's hard to fix it once it's damaged &#; It ruins the sheetrock, too, when you pull it off, because you have to pry it off, so then your backing, your drywall board is also ruined.&#;
Our standard Corner Bead & Archway is just one option in Trim-Tex&#;s arsenal of drywall-finishing solutions. For corners like this, there are so many possibilities for different looks, different installation methods and different problem-solvers. To get the full picture, download a digital copy of our full catalog by hitting the button below!
For more information, please visit buy fiberglass insect screen.