Want more information on c-glass fiberglass yarn supplier? Feel free to contact us.
Fiberglass fabrics have many unique and outstanding properties, which provide design opportunities for the improvement of existing products and the development of new, lightweight, and cost-efficient products.
JPS technicians, design engineers, and technical representatives welcome the opportunity to combine their experience and knowledge of these unique properties to provide the superior products required by industry today.
Chemical Resistance
(Click to Read More)
Inorganic fiberglass textile fibers will not rot, mildew or deteriorate. They resist most acids with the exception of hydrofluoric acid and hot phosphoric acid.
Dimensional Stability
The fiberglass yarns used in manufacturing glass fabrics will not stretch or shrink as a result of changes in atmospheric conditions. Nominal elongation at break is 3-4%. The average linear thermal expansion coefficient of bulk E glass is 5.4 x 10-6 cm/cm/°C.
Good Thermal Properties
Fiberglass fabrics have a low coefficient of thermal expansion and relatively high thermal conductivity. Glass fabrics will dissipate heat more rapidly than asbestos or organic fibers.
High Tensile Strength
Fiberglass yarn has a high strength-to-weight ratio. Pound for pound, fiberglass yarn is twice as strong as steel wire. The ability to design unidirectional or bidirectional strength into a fabric adds considerably to end-use product flexibility.
High Thermal Endurance
Inorganic glass fibers cannot burn and are basically unaffected by high baking and curing temperatures often encountered in industrial processing. Fiberglass will retain approximately 50% of its strength at 700°F and as much as 25% at 1000°F.
Low Moisture Absorption
Fiberglass yarn is made from noncellular fiber and, therefore, experiences extremely low moisture absorption.
Outstanding Electrical Insulation
High dielectric strength and relatively low dielectric constants, plus low water absorption and high temperature resistance, make fiberglass fabrics outstanding for electrical insulating purposes.
Product Flexibility
For more information, please visit fiberglass mesh for roofing.
The extremely fine filaments used in fiberglass yarns, the multitude of yarn sizes and configurations, different weave types, and many special finishes, make fiberglass fabrics available for a broad range of industrial end uses.
Low Cost
Fiberglass fabrics do the job and compare favorably in cost with synthetic and natural fiber fabrics.
Selection
There are five basic design variables to consider when choosing Astroquartz ® fabrics including thickness, weight, construction, yarn size and finish.
The selection of the proper fabric to meet the demands of your specific application require the combined knowledge of industry designers and engineers, and JPS fiberglass design professionals. Prior to selecting a fabric for any applications, we recommend that you consult with a JPS technical or sales representative.
Heat-resistant Glass fiber Woven Roving with high quality
Heat-resistant Glass fiber Woven Roving is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. It’s widely used in hand lay up, mold press, GRP forming process and robot processes to manufacture boats, vessels, plane, automobile parts, panels, storage tanks .
Except for normal specifications,Special specification can be customized.
Product specification
Item
Tex Count of cloth
(root/cm) Unit area mass
(g/m) Breaking strength(N)
Width(mm)
Wrap yarn Weft yarn Wrap yarn Weft yarn Wrap yarn Weft yarn
EWR200 180 180 6.0 5.0 200±15 1300 1100 30-3000
EWR300 300 300 5.0 4.0 300±15 1800 1700 30-3000
EWR400 576 576 3.6 3.2 400±20 2500 2200 30-3000
EWR500 900 900 2.9 2.7 500±25 3000 2750 30-3000
EWR600 1200 1200 2.6 2.5 600±30 4000 3850 30-3000
EWR800 2400 2400 1.8 1.8 800±40 4600 4400 30-3000
Product Features
1. Warp and weft roving aligned in a parallel and flat manner, resulting in uniform tension.
2. Densely aligned fibers, resulting in high dimensional stability and making handing easy.
3. Good mold ability, fast and complete wet in resins, resulting in high productivity.
4. Good transparency and high strength of composite products.
Product Application
Main application:automotive, vessels, gratings, bathtub, FRP composite, tanks, waterproof, reinforcement, insulation, spraying,spray gun,mat,gmt,boat,csm,frp,panel,car body,knitting,chopped strand,pipe,gypsum mold,boat hulls,wind energy,wind blades,fiberglass boat hulls,boats fiberglass,fiberglass pools,fiberglass fish tank,fiberglass fishing boat,fiberglass molds,fiberglass rods,fiberglass swimming pool,fiberglass boats molds, fiberglass pool,fiberglass chopper gun,fiberglass spray gun, fiberglass water tank,fiberglass pressure vessel,fiberglass poles,fiberglass fish pond,fiberglass resin,fiberglass car body,fiberglass panels,fiberglass ladder,fiberglass insulation,fiberglass dinghy,fiberglass car roof top tent,fiberglass statue,fiberglass grating,fiberglass rebar,glass fiber reinforced concrete,fiber glass swimming pooland etc.
Packaging &Shipping
Woven roving could be produced into different widths,each roll is wound on a su i table cardboard tubes with inside diameter of 100mm,then put into a polythylene bag,fastened the bag entrance and packed into a su i table cardboard box.Upon to customer’s request,this product could be shipped either with carton packaging only or with packaging,In pallet packaging,the products could be horizontally put on the pallets and fastened with packing straps and shrink film.
Shipping: by sea or by air
Delivery Detail:15-20 days after receive the advance payment
Company Information
Hebei Yuniu Fiberglass Manufacturing Co.,Ltd,established in 2012, is a professional fiberglass manufacturer in north China, which located at Guangzong County,Xingtai City, Hebei Province.China. As a professional fiberglass enterprise,mainly manufactures and distributes a wide range of E type fiberglass products, such as fiberglass roving,fiberglass chopped strands, fiberglass chopped strand mat,fiberglass woven roving, needled mat, fiberglass fabric and so on.These are widely used in construction industry, automotive industry, airplane and ship building area, chemistry and chemical industry, electrical and electronics, sports and leisure,the emerging field of environmental protection like wind energy, combination of varies of pipes and thermal insulation material.The E-glass products are compatible with the various resins,such as EP/UP/VE/PA and so on.
Our Advantage
Our well equipped infrastructure is crucial in the growth and expansion of our business operations. The sophisticated and modern facilities help us to develop Fiber-Glass Products effectively. Our infrastructure is spread over a large area and is segregated into manufacturing unit, quality division and warehousing unit. Our manufacturing unit is equipped with special purpose machines and requisite tools & equipment. With the use of these machines, we are able to manufacture our products in bulk quantity and meet the requirements of our clients. We make sure that Fiber-Glass Products render high quality standards. Our quality controllers regularly monitor entire stage of production process to ensure the perfect quality of our products. We adhere to latest technology and quality control procedure, which ensures quality standards and specifications. The company is able to offer first class quality and main products with full trace-ability by BV,SGS and ISO9001. Therefore, you could rest assure our perfect quality and service.
Our Services
Our company has our special professional after-sale service department, products have enjoyed a high prestige in domestic and popular in international market too. Our mission is to serve the global composite materials purchases, to make people’s life more safe, more environmental. Since established in 2012, with the perfect sales team at home and abroad.Our products have been sold to eighty-six countries.We now have market share in Europe,North and South America, Australia, Africa, the Middle East and South-East Asia. Give us a chance, and we will return you with satisfaction.We sincerely look forward to working with you hand in hand.
Q1:Are you a factory? Where are you located?
A: we are a manufacturer.
Q2:What’s the MOQ?
A: Usually 1 Ton
Q3:Package & Shipping.
A: Normal package:carton(Incuded in the unite price)
Special Packge: need to charge according the actual situation.
Normal shipping :your nominated Freight forwarding.
Q4:When can I offer?
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price pls call us or tell us in your email , so that we can reply you priority.
Q5:How do you charge the sample fees?
A: If you need a samples from our stock, we can provide to you for free, but you need to pay the freight charge.If you need a special size, We will charge the sample making fee which is refundable when you place an order.
Q6:What’s your delivery time for production?
A:If we have stock , can delivery in 7 days ; if without the stock, need 7~15 days !
YuNiu Fiberglass Manufacturing
Your success is our business!
Any questions, please contact us freely.
For more fiberglass mesh flooringinformation, please contact us. We will provide professional answers.