Key Takeaways
Are you interested in learning more about pvc corner guard? Contact us today to secure an expert consultation!
Understanding corner guards:Understanding corner guards:Check out our wall protection
What is a corner guard? A corner guard is a very handy little device that protects the corners and edges of your walls from damage. You can get them in a wide range of materials and designs, with most of them made to blend in with the wall, making them almost unnoticeable. However, corner guards are not limited to the home and can be attached to the exterior of buildings to prevent damage from cars. You can also find corner guards at airports, factories, and hospitals where there is a lot of heavy machinery and equipment that could do an awful lot of damage to walls.
You may have seen them used for moving day when heavy furniture has been maneuvered around the property. No matter how careful you are, if you don&#;t have corner guards at the ready, you can imagine how much damage a piece of furniture can do to your walls with one wrong move.
If you are renting a property, it may also be a good idea to put some corner guards on your walls to have a better chance of getting your full security deposit back. Corner guards also cut down on repair and maintenance costs in a property you already own.
Corner guards are also recommended for childproofing your home as it rounds off the sharp edges that young children could run into. These tend to be a lot more cushioned than the traditional corner guard and are made of silicone rubber that can withstand a bit of gnawing from the toddler.
Depending on the shape and size of the corner guard, you can also stick them to table edges and door handles to keep your child as safe as possible.
What Are They Made Of?
Corner guards are usually made from various high-impact plastics that are durable and economical. Still, there are numerous materials corner guards can be made of to accommodate whatever wall they are to be applied to.
Some corner guards are made from PVC-u, which is stain and scratch-resistant and colored and textured in a particular way to hide any scratches and scrapes that they may have sustained.
Suppose you need some corner guards that offer more protection than the standard models. In that case, you should look for ones made with the addition of an aluminum retainer that does a great job at absorbing impact, whereas ones without this retainer may shatter and cause even more damage to your wall.
What size are corner guards?
As mentioned earlier, corner guards come in a wide variety of sizes and are measured by their &#;wing size,&#; which measures the distance from the corner, and the standard wing size is from ¾-inches to 3-inches.
The length of a corner guard is the measurement once it has been installed onto the corner vertically. There is no standard length for corner guards as it can vary so much, but you can often find them at lengths of 4 feet and 8 feet. You can quickly get corner guards cut precisely per your measurements to ensure that you have every area covered.
If you are a bit of a DIYer, you can cut the corner guards yourself with either a hand saw, power saw, or shears. Do not attempt this unless you are experienced with such machinery and are sure you have the correct measurements to cut to.
The cutting tool you use also depends on the material of the corner guard because some materials such as polycarbonate can break, so make sure you use a fine-tooth saw blade and one made for cutting plastic materials.
Before you go anywhere near your corner guard with a sharp tool, you should measure the length you want, mark it with a line and then measure once more to make sure.
The company is the world’s best pvc skirting board supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
If you are not confident with a hand, saw, or power saw, then shears can still do a great job cutting cleanly through the materials but in a much more controlled and safe way. However, if you have a particularly thick corner guard, then the shears may not be able to cut through it
How to Install Corner Guards?
There are three main ways that corner guards are installed onto surfaces: adhesive, double-sided tape, and screw-on.
The corner guards that use adhesive have the adhesive or glue selected so that it meets both properties of the corner guard and the corner because if it were a glue that didn&#;t stick to either material properly, it would not last long on your wall.
Some corner guards come with a standard adhesive that should do the job in most cases, but if not, it&#;s easy enough to go and get your glue, which is worth it to know that your corner guard is secure once it has been installed.
The corner guards that use double-sided tape make it easy to install, and almost everyone has had experience using double-sided tape. You don&#;t need any tools to do this, and even though it sticks the corner guard to the corner with a firm grip, it is easier to remove than an adhesive or screw-on corner guard.
Finally, if you are after a corner guard, that means business and will hold on with everything they&#;ve got no matter what you throw at them, then you might be best with a screw-on corner guard. For this installation method, you are required to drill a few small holes (depending on the length of the corner guard) into the corner before fastening it onto the wall with screws going into the holes.
As you can probably imagine, this is a method that should only really be used for long-term situations as they are not as easy to take off and will leave small holes behind that may call for some spackle.
What Corner Guard Should I Get?
So, now that you know what a corner guard is, what they are made of, and how to install one, you may be interested in going out and getting one. Not so fast, because there are some basic things that you should think about to ensure that the corner guards you pick up are the right ones for you.
First, think about how much protection you are looking for to get a corner guard with the appropriate structure and materials. If you happen to like the look of corner guards, you will be happy to know that corner guards on the market are just for aesthetic purposes but will offer little to no protection to your wall.
Once you know what purpose you want your corner guard to have, you should consider getting one that will blend in with your wall. For example, if your wall is made of wood, you should get a corner guard made of wood so that it blends seamlessly. If you cannot find a corner guard that matches your wall, you can paint it to fit, most materials will make this easy, but you might have to go over other materials with another coat or two. If you do paint them, there is a chance that any scrapes and bumps may show up in the paint, but you can touch it up if it bothers you.
The final thing that you should decide is how you want to install your corner guard. Three main methods have been previously discussed and, depending on how confident you are with tools, can play a big part in how you want to go about installing this product to your wall.
Despite this, all methods are relatively easy to do but remember that if you use a screw-on corner guard, it will be much more secure than a double-sided tape corner guard.
SBI Contracting is a company that specializes in manufacturing partitioning materials and other furnishings, including wall protection. We offer you only the best in Boise, Idaho if you need one. Reach out and order today!
Do you use dumpsters in your construction projects? Are you required to cover your dumpster at the end of the day? Because of imperfections in the corner of the dumpster are you constantly ripping your tarp covers? Then you need TheCornerGuardStore's Tarp-Saver Corner Guards! Protects your dumpster tarps from ripping. Simple in design, effective in use. Easy to snap on using powerful magnets. Just as easy to take off.
Want more information on pvc corner protectors? Feel free to contact us.