Tungsten copper (WCu) alloy is a composite material that combines the thermal conductivity benefits of copper with the low thermal expansion properties of tungsten. By adjusting the tungsten content, its thermal expansion can be tailored to match materials such as silicon (Si), aluminum oxide (Al2O3), and beryllium oxide (BeO). Typically, the copper content ranges from 10% to 50%. This material has high density, excellent heat dissipation, high-temperature strength, and resistance to erosion.
The company is the world’s best Tungsten Copper Alloy Plate supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Composites
Nominal Composition
(% Weight)
Density
(g/cm3, ≥)
Electrical Resistivity
(20°C, µΩ·cm, ≤)
Electrical conductivity
(IACS%, ≥)
Hardness(≥)
Brinell Hardness
Bending Strength
Mpa
Kgf/mm2
Mpa
Kgf/mm2
CuW50
50% Copper
50% Tungsten
11.85
3.2
54
1128
115
---
---
CuW55
45% Copper
55% Tungsten
12.3
3.5
49
1226
125
---
---
CuW60
40% Copper
60% Tungsten
12.75
3.7
47
1373
140
---
---
CuW65
35% Copper
65% Tungsten
13.3
3.9
44
1520
155
---
---
CuW70
30% Copper
70% Tungsten
If you want to learn more, please visit our website Molybdenum Boats.
13.8
4.1
42
1716
175
667
68
CuW75
25% Copper
75% Tungsten
14.5
4.5
38
1912
195
706
72
CuW80
20% Copper
80% Tungsten
15.15
5.0
34
2158
220
736
75
CuW85
15% Copper
85% Tungsten
15.9
5.7
30
2354
240
765
78
CuW90
10% Copper
90% Tungsten
16.75
6.5
27
2550
260
804
82
We also provide Tungsten Carbide Copper and Tungsten Carbide Silver.
Tungsten copper heat sinks are extensively used as thermal mounting plates, chip carriers, flanges, and frames for RF and microwave packages, laser diode packages, and complex carriers for optoelectronics amplifiers, receivers, transmitters, tunable lasers, etc.
Tungsten Copper alloys will be tagged and labeled externally to ensure efficient identification and quality control. Great care will be taken to avoid any damage caused during storage or transportation. They will be packed in a carton or wooden case supported with soft materials to ensure the products will not shift inside the cases.
This refractory metal composite materials are a combination of tungsten combined with copper or silver. The manufacturing process is to press the refractory, sinter the pressed compact at a high temperature, and infiltrate with copper or silver. All this is done under very closely controlled conditions. The result is a relatively hard materials with superior arc and wear resistance, high physical properties at elevated temperatures, and good electrical and thermal conductivity.
They are mainly used for making finished tungsten wire, rods and plates and additives to precision alloys.
They are mainly for electrical light sources, electrical contacts for vacuum coated films and heating elements, etc.
Are you interested in learning more about Tungsten Bars? Contact us today to secure an expert consultation!