Want more information on woodworking face shield? Feel free to contact us.

Want Water With That face Shield?

Face shield protection is an important part of personal protective equipment (PPE). OSHA regulation 29 CFR .133 gives the requirements for employers to follow on the appropriate use and selection of face shields and protective eyewear. OSHA relies on ANSI to provide manufacturing standards for face shields as well as other eye and facial protective equipment. The manufacturing standard is ANSI Z87.1 and is titled, &#;American National Standard Practice for Occupational and Educational Eye and Face Protection.&#; The ANSI manufacturing standards for face shields includes testing for impact and optical clarity. Face shields are primarily designed to protect the face from flying objects, molten metal, liquid chemical splash, bodily fluids and potentially injurious light radiation.

The most current ANSI standard for eye and face protection is ANSI Z87.1 &#; . Changes for the revision include the following:

• More emphasis on specific hazard as opposed to protector type
• Impact standards were changed from &#;basic impact&#; and &#;high impact&#; ( standard) to &#;non-impact&#; and &#;impact&#; ( standard)
• Greater side to side and top to bottom coverage
• New testing for splash, dust and fine dust

The ANSI standard states that face shields are considered secondary eye protection and must be used in conjunction with safety glasses or goggles. The standard does not distinguish between primary and secondary eye protection. Most manufacturers of face shields suggest using safety glasses or goggles underneath face shields for additional eye protection.

OSHA recognizes the revised standard. OSHA also recognizes the and (R) ANSI standards for eye and face protection. By recognizing the and standards, employers are allowed to continue to use eye and face shield protection products meeting the , or (R) standards.

Face Shield Visor Materials

Face shield visors are constructed from several types of materials. These materials include polycarbonate, propionate, acetate, and PETG (polyethylene terephthalate glycol). It is important to select the proper visor for the work environment.

Polycarbonate &#; Polycarbonate material provides the best impact resistance and heat resistance of all visor materials. Specialty polycarbonate visors are also used for arc flash protection and high heat and radiation protection. Polycarbonate also provides chemical splash protection and holds up well in extremely cold temperatures. Polycarbonate is generally more expensive than other visor materials.

Acetate &#; Acetate provides the best clarity of all the visor materials and tends to be more scratch resistant. It also offers chemical splash and may be rated impact protection.

Propionate &#; Propionate material provides better impact protection than acetate while also offering chemical splash protection. Propionate material tends to be a lower price point than both acetate and polycarbonate.

PETG &#; PETG offers chemical splash protection and may provide impact protection. PETG tends to be the most economical option for face shield choices.

ANSI does not provide a standard that applies to chemical splash protection or chemical resistance. The manufacturer of the face shield is the best source for information on chemical resistance testing.

Some face shield visors come in steel or nylon mesh material. Mesh visors provide good airflow for worker comfort and are typically used in the logging and landscaping industry to protect the face from flying debris when cutting wood or shrubbery.

Specialty Face Shield Protection

Specialty face shields for arc flash, heat, radiation, and welding protection are available as well. Specialty shields such as these may need to meet specific requirements and it is generally best to contact a safety supply provider such as Grainger technical support to determine what protective shield will be most appropriate for your application or need.

Arc Flash &#; These face shields are used for protection against an arc flash. The requirements for arc flash protection are provided by National Fire Protection Association (NFPA) in the NFPA&#;s 70E standard. Face shields are included in this standard and must provide protection based on Arc Thermal Performance Value (ATPV) which is measured in calories per square centimeter (cal/cm2). The calorie rating will need to be determined first in order to be able to select the shield that will provide the best protection. In determining the level of protection needed for your job or task, some methods available to you are; referring to the NFPA 70E- Article 130 tables 130.4 ( C )(a) or (b), 130.7 ( C )(15)(a) and 130.7 ( C ) (16) or Annex D. Another option is to use an industry accepted software program or use a consulting firm to complete the risk assessment.

Heat and Radiation &#; There are face shields that will provide protection against heat and radiation. These face shields prevent burns by filtering out intense ultraviolet and infrared radiation. They are made from polycarbonate with special coatings. An example of this would be adding a thin layer of gold film to increase reflectivity.

Welding &#; Shaded welding face shields provide protection from UV and Infra-red radiation generated when working with molten metal. The shades usually range from Shade 2 &#; 14 with Shade 14 being the darkest shade. Refer to Quick Tips #109: Welding Safety for more information and proper selection of welding face shields.

When selecting a face shield or any other PPE, OSHA suggests conducting a worksite hazard assessment. OSHA provides guidelines in 29 CFR Subpart I Appendix B on how to evaluate worksite hazards and select the proper PPE. After selecting the proper PPE, employers should provide training to workers on the correct use and maintenance of their PPE. Proper hazard assessment, PPE selection and training can significantly reduce worker injuries and ensure a safe work environment.

Frequently Asked Questions

Q. What is the best face shield visor for a specified chemical? A. OSHA suggests that PPE such as face shield protection should be used as a last resort and an engineering solution is preferable when working with injurious chemicals. Engineering solution examples include using a chemical splash guard or a fume hood. A chemical splash guard or a fume hood will stop injurious chemicals from ever reaching the face. If an engineering solution is not practical, a face shield visors will offer limited chemical splash protection. The manufacturer of the face shield is the best source for chemical resistance data. If, for example, a face shield is needed for hydrochloric acid splash protection, contact the manufacturer of the face shield to inquire about its resistance to this chemical. Q. Can I use an inexpensive face shield for impact protection? A. The revised ANSI Z87.1 &#; categorizes face shields as either impact or non-impact. All ANSI Z87.1 rated face shields with a &#;+&#; symbol stamped on the face shield (meaning impact rated) provide impact protection regardless of price. Manufacturer testing of visor materials indicate that polycarbonate offers the best impact protection and PETG the least amount of protection from impact force. This said, visors made from both polycarbonate and PETG may meet the ANSI testing standards for impact, even though polycarbonate is generally most expensive visor material. OSHA states that the employer must provide PPE to workers that give sufficient protection from the hazard. Polycarbonate would be a better choice if the hazard requires a higher impact protection than PETG.

Sources

 

41.

-88.

J Occup Environ Hyg.

; 13(4): 235&#;242.

doi: 

10./..

PMCID:

PMC

NIHMSID:

NIHMS

PMID:

Face shields for infection control: A review

Raymond J. Roberge

National Personal Protective Technology Laboratory, National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention, Pittsburgh, Pennsylvania

Find articles by Raymond J. Roberge

Author information Copyright and License information PMC Disclaimer

National Personal Protective Technology Laboratory, National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention, Pittsburgh, Pennsylvania

CONTACT Raymond J. Roberge

,

National Personal Protective Technology Laboratory, 626 Cochrans Mill Road, Pittsburgh, PA

Raymond J. Roberge vog.cdc@0ntd National Personal Protective Technology Laboratory, 626 Cochrans Mill Road, Pittsburgh, PA

Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/uoeh

Copyright This article not subject to U.S. copyright law

This article is made available via the PMC Open Access Subset for unrestricted re-use and analyses in any form or by any means with acknowledgement of the original source. These permissions are granted for the duration of the COVID-19 pandemic or until permissions are revoked in writing. Upon expiration of these permissions, PMC is granted a perpetual license to make this article available via PMC and Europe PMC, consistent with existing copyright protections.

ABSTRACT

Face shields are personal protective equipment devices that are used by many workers (e.g., medical, dental, veterinary) for protection of the facial area and associated mucous membranes (eyes, nose, mouth) from splashes, sprays, and spatter of body fluids. Face shields are generally not used alone, but in conjunction with other protective equipment and are therefore classified as adjunctive personal protective equipment. Although there are millions of potential users of face shields, guidelines for their use vary between governmental agencies and professional societies and little research is available regarding their efficacy.

If you want to learn more, please visit our website safety shoes lightweight.

KEYWORDS:

Face shields, guidance, infection control, proper use, regulations

Background

Healthcare workers' faces have been reported to be the body part most commonly contaminated by splashes, sprays and spatter of body fluids.[1] A face shield is classified as personal protective equipment (PPE) that provides barrier protection to the facial area and related mucous membranes (eyes, nose, lips). A face shield offers a number of potential advantages, as well as some disadvantages, compared with other forms of face/eye protection used in healthcare and related fields ( ). The millions of potential users of face shields include healthcare workers, dental providers, veterinary care personnel, laboratory workers, pre-hospital emergency medical providers, police, firefighters, and custodial staff dealing with spills and contaminated waste.[2] It is not precisely known when eye protection first came to be used in the medical field,[3] but records indicate that a patent was granted to Ellen Dempsey of Albany, New York, for a transparent &#;sanitary face shield for protection from inhaling disease producing germs.&#;[4] In , James H. Bolker was granted a patent for a surgical hood with a clear, plastic faceplate that included a suction system to remove the exhaled breath from under the face plate[5] and, in , a cap with an incorporated face shield designed for non-surgical medical personnel was patented.[6] The introduction of the Occupational Safety and Health Administration's (OSHA) Bloodborne Pathogens Standard .1&#;030,[7] as well as recent outbreaks of serious airborne infectious diseases (e.g., Severe Acute Respiratory Syndrome [SARS], Avian Influenza, etc.) and severe infectious agents associated with the potential for body fluid exposures (e.g., Ebola virus), have resulted in increased attention to face/eye protection. The purpose of this article is to provide the reader with a review of the use of face shields for infection control purposes in order to assist in the selection and proper utilization of this type of PPE.

Table 1.

Advantages

• -more comfortable

• -protect a larger portion of the face

• -less retained dermal facial heat

• -less fogging than goggles

• -less claustrophobic

• -no impact on breathing resistance

• -no fit testing required

• -can be disinfected easily

• -wearers do not need to be clean shaven

• -easy to don and doff

• -relatively inexpensive

• -no impact on vocalization

• -can be worn concurrent to other face/eye PPE

• -do not impede facial nonverbal communication

• -reduced patient anxiety

• -protects against self-inoculation over a wider facial area

• -may extend the useful life of a protective facemask when used concurrently

Disadvantages

• -glare

• -fogging

• -optically imperfect

• -some models may not fit properly over some respirators (e.g., duckbill filtering facepiece respirators)

• -bulkier than goggles and safety glasses

• -peripheral fit poorer than protective facemasks

Open in a separate window

Face shield design and structure

The majority of eye and face protection currently used in the U.S. is designed, tested, and manufactured in accordance with the American National Standards Institute (ANSI)/International Safety Equipment Association (ISEA) Z.87.1&#; standard.[8] The major structural components of a face shield include the following:

• a)

  Visor. Visors, also referred to as lenses or windows,[9] are manufactured from any of several types of materials that include polycarbonate, propionate, acetate, polyvinyl chloride, and polyethylene terephthalate glycol (PETG) and come in disposable, reusable, and replaceable models ( ). Acetate provides the best clarity and PETG tends to be the most economical,[8] but polycarbonate is one of the most widely used.[10] Polycarbonate and propionate offer better, although still somewhat imperfect, optical quality that aids in reducing eye strain associated with face shield wear.[9, 11] Visors can be treated with advanced coatings to impart anti-glare, anti-static, and anti-fogging properties, ultraviolet light (UV) protection, and scratch resistance features to extend the life of the visor.[11] Some models come with built-in goggles that are incorporated into the visor.[9, 10] Visors are available in different lengths that include half facepiece length extending to the mid-face, full facepiece length that extends to the bottom of the chin, and a face/neck length that also covers the anterior neck area ( and ). Most visors curve around the face and come in different widths; wider visors offer more peripheral protection.[9] Some one-piece face shields have visors that conform to the wearer's face upon donning ( ).[10] Recommendations from the Centers for Disease Control and Prevention (CDC) are for visors that are of sufficient width to reach at least the point of the ear,[12] as this will lessen the chances of the likelihood that a splash could go around the edge of the face shield and reach the eyes. In addition, visors should have crown and chin protection for improved infection control purposes.[7, 13] Some models of disposable medical/surgical face masks are available with an integral, thin plastic visor fitted to the top of the mask with an anti-fogging device between them to reduce the effects of exhaled moisture ( ).[12, 14]

  . Visors, also referred to as lenses or windows,are manufactured from any of several types of materials that include polycarbonate, propionate, acetate, polyvinyl chloride, and polyethylene terephthalate glycol (PETG) and come in disposable, reusable, and replaceable models ( ). Acetate provides the best clarity and PETG tends to be the most economical,but polycarbonate is one of the most widely used.Polycarbonate and propionate offer better, although still somewhat imperfect, optical quality that aids in reducing eye strain associated with face shield wear.Visors can be treated with advanced coatings to impart anti-glare, anti-static, and anti-fogging properties, ultraviolet light (UV) protection, and scratch resistance features to extend the life of the visor.Some models come with built-in goggles that are incorporated into the visor.Visors are available in different lengths that include half facepiece length extending to the mid-face, full facepiece length that extends to the bottom of the chin, and a face/neck length that also covers the anterior neck area ( and ). Most visors curve around the face and come in different widths; wider visors offer more peripheral protection.Some one-piece face shields have visors that conform to the wearer's face upon donning ( ).Recommendations from the Centers for Disease Control and Prevention (CDC) are for visors that are of sufficient width to reach at least the point of the ear,as this will lessen the chances of the likelihood that a splash could go around the edge of the face shield and reach the eyes. In addition, visors should have crown and chin protection for improved infection control purposes.Some models of disposable medical/surgical face masks are available with an integral, thin plastic visor fitted to the top of the mask with an anti-fogging device between them to reduce the effects of exhaled moisture ( ).

  Open in a separate window
  Open in a separate window
  Open in a separate window
  Open in a separate window

• b)

  Frame. Face shield frames used in healthcare are generally made of lightweight plastic. There are a variety of frame styles, including adjustable and nonadjustable frames that fully or partially encircle the circumference of the skull or those with eyeglass-type temple bars that are worn like standard eyewear ( and ) There are also metal clip-on frames available that are designed to attach face shield visors to prescription eyewear, and some frames allow for the visor to be flipped up when not in use. A number of manufacturers offer detachable frames for easy change-out of the face shield visor. Some models also incorporate a brow cap ( ) into the frame that affords additional splash protection in the forehead region, as well as allowing for more visor distance from the face that better accommodates the wearing of additional PPE (e.g., goggles, loupes, prescription eyewear, respirators) ( ). Disposable visor-only face shields are also available that have a forehead foam cushion that provides a comfortable seal to the forehead ( ).b)

• c)

  Suspension Systems. There are a variety of face shield suspension systems on the market that offer either fully or partially circumferential attachment features. Fully circumferential suspension systems include plastic headbands that are adjustable for comfort by a ratchet mechanism, pin-lock systems, or Velcro®; nonadjustable systems employ elastic straps ( , ). Some models utilize eyeglass-type temple bars for suspension ( ) with or without eyewear-like nose pads and bridge assemblies to assist in maintaining face shield position and stability on the face. A top band that is adjusted for depth is found on some models (

Research

Face shields provide a barrier to acutely-expelled aerosols of body fluids and are commonly used as an alternative to goggles as they confer protection to a larger area of the face.[12] However, as highlighted in a recent Institute of Medicine report,[15] little is known about the effectiveness of face shields in preventing the transmission of viral respiratory diseases. Utilizing a cough aerosol simulator loaded with influenza virus (aerosol volume mean diameter of 8.5 µm) and a breathing simulator, Lindsley et al.[16] reported 96% and 92% reductions in the risk of inhalational exposure immediately after a cough for a face shield at distances of 18 in (46 cm) and 72 in (183 cm), respectively. Decreasing the aerosol size to 3.4 µm resulted in the face shield blocking 68% of the inhalational exposure at 18 in (46 cm) immediately after the cough and 23% over 1&#;30 min post-cough (during which time the larger aerosol particles had settled out and droplet nuclei had formed and remained airborne so that flow occurred more easily around the edges of the face shield).[16] Shoham et al.[17] sprayed a fluorescent dye (particle diameter &#;5µm) at a distance of 20 in (50 cm) away from a mannequin head outfitted with various types of PPE. They found that a face shield with head/neck length, three separate contact points at the forehead, and side curve reaching to the point of the ear (Bettershield&#;, Southmedic, Barrie, Ontario, CA), or the combination of this face shield and an N95 filtering facepiece respirator (N95 FFR), protected the eyes, nares and mouth from contamination. Conversely, these same investigators found that use of safety glasses with either a surgical mask or N95 FFR resulted in some eye contamination.[17] Mansour III et al.[18] utilized a mannequin head to study eye (conjunctival) contamination during performance of a femoral osteotomy and found a 30% incidence of contamination when using a combination surgical mask with integral eye shield (visor) and 3% for disposable plastic glasses. Utilizing an aerosolized dye (mean particle size 4.8 µm) emitted at a distance of 6 in (15 cm) from subjects wearing two models of face shields, Christensen et al.[19] noted that the face shields were inferior to two models of surgical face masks tested similarly for particle penetration and that the combination of one of the facemasks with a face shield improved results only marginally. These face shield results were attributable to the lack of a peripheral fit.[19] In a human study using sprayed water during simulated surgery, Loveridge et al.[20] observed a 40.5% incidence of contamination of the inner surface of a combination surgical mask with integral visor and 6.5% contamination of the wearers' face. Bentley et al.[21] demonstrated that use of a face shield by dental personnel during simulated dental procedures on a mannequin head did not prevent aerosol contamination of a concurrently worn, cup-shaped surgical face mask. Monkey-related Cercopithecine herpesvirus 1 (B virus) infection has been reported in an animal handler[22] and SARS in a nurse,[23] both of whom were wearing a combination surgical mask with integral visor. An epidemiological study[24] reported that the nonuse of face shields by nurses, during high-risk aerosolizing procedures on patients with respiratory infections, resulted in a greater than three-fold increased risk of infection. Use of face shields alone for three months, compared with the use of face masks alone for an equal period, during thoracic and general surgeries resulted in no difference in infection rates of patients.[25] Clearly, there is a need for further research into the protection from infectious airborne pathogens afforded by face shields either worn alone or in conjunction with other PPE worn simultaneously. This should include well-designed aerosol transmission studies,[16] as well as possibly pursuing innovative approaches to design and function (incorporating miniature fans to purge air from the face shield deadspace, application of biostatic films for decontamination purposes, etc.).

Regulatory standards

There is currently no universal standard for face/eye protection from biological hazards.[2] Therefore, the recommendations for the proper use of face shields vary widely, indicating the need for a consensus on the use of certain face/eye protection for specific medical procedures.[26] OSHA's Bloodborne Pathogens standard (: subpart (d)(3)(i)) states: &#;Masks in combination with eye protection devices, such as goggles or glasses with solid side shields, or chin-length face shields, shall be worn whenever splashes, spray, spatter, or droplets of blood or other potentially infectious materials may be generated and eye, nose, or mouth contamination can be reasonably anticipated.&#;[7] Face shield product performance specifications are found in the recently-revised voluntary ANSI/ISEA Z87.1 &#; American National Standard for Occupational and Educational Eye and Face Protection that identifies face shields, from an industrial standpoint, as being designed to protect from impact, optical radiation, droplet, and splash (e.g., chemical), dust and fine dust particles, but does not cover bloodborne pathogens, X-rays, high-energy particulate radiation, microwaves, radio-frequency radiation, lasers, masers, and sports and recreation.[27] Face shields do not protect fully from impact hazards, so that OSHA requires their use in conjunction with additional eye protection (goggles, prescription spectacles with side shields, etc.).[28] From the infection control standpoint, no standards currently exist regarding performance standards, but the ISEA Eye and Face Protection Group has initiated development of a voluntary standard that sets forth criteria related to the general performance requirements, test methods, and permanent markings of protectors to minimize or prevent eye and face exposure of the wearer to sprays, splashes, or droplets of blood, body fluids, excretions, secretions, and other potentially infectious materials in occupational and educational environments where biological hazards are expected and routine.[2] Face shields are considered Class I medical devices that are exempt from Food and Drug Administration (FDA) Pre-Market Notification (Form 510[K]), but are subject to the FDA's Quality System Regulation (21 Code of Federal Regulations 820) that includes periodic inspection and enforcement actions (warning letters, injunctions, seizure, civil monetary penalties).[29] Face masks (surgical, medical, etc.) that incorporate a face shield or visor into their design are considered Class II medical devices and required to submit an FDA Form 510(K).

Guidelines

There is great variance in official (governmental) and professional society (medical, dental, etc.) guidelines for the appropriate use of face shields in the context of protection from biological hazards. Healthcare Infection Control Practices Advisory Committee/CDC Standard Precautions guidelines for prevention of transmission of infectious agents in healthcare venues includes the use of face shields (with a medical/surgical face mask) when sprays, splashes, or splatter are anticipated.[30] The World Health Organization's health care facility recommendations for standard precautions include a face shield as an alternative to the use of a medical/surgical or procedural mask with eye protection (eye visor or goggles).[31] Similarly, the Ohio State Dental Board guidelines for infection control states that dental healthcare workers need not wear medical/surgical masks when wearing an appropriate face shield that provides protection at both the top and the sides.32] The Organization for Safety, Asepsis, and Protection, an advocacy group for dental practitioners, advises that use of a face shield alone for protection from contamination by body fluids is likely insufficient, and it is prudent to assume that in those situations where a face shield is used to protect against splash or splatter, a medical/surgical mask would also be indicated.[33] New York State mandatory infection control training offered by approved providers to healthcare workers and medical and physician assistant students states: &#;When skin protection, in addition to mouth, nose and eye protection, is needed or desired, for example, when irrigating a wound or suctioning copious secretions, a face shield can be used as a substitute to wearing a mask or goggles. The face shield should cover the forehead, extend below the chin, and wrap around the side of the face.&#;[34] The use of a minimum of an N95 FFR, concurrent with a face shield, has been advocated for protection from serious airborne respiratory infectious diseases (e.g., novel influenza A viruses, SARS) and during procedures on infected persons that result in aerosolization of body fluids (airway suctioning, intubation, etc.).[35, 36] The CDC and U.S. Air Force Dental Evaluation and Consultation Service both promote the use of a medical/surgical mask with a face shield during dental procedures,[37, 38] whereas an Association of Surgical Technologists' standard on eye protection during surgery[13] mandates the wearing of goggles with face shields during invasive surgical procedures. The ISEA Eye and Face Protection Group has initiated development of a voluntary standard that sets forth criteria related to the general performance requirements, test methods, and permanent markings of protectors to minimize or prevent eye and face exposure of the wearer to sprays, splashes, or droplets of blood, body fluids, excretions, secretions, and other potentially infectious materials in occupational and educational environments where biological hazards are expected and routine.[2]

Selection of face shields

Face shields are meant to be used as barrier protection for the facial area and associated mucous membranes from airborne body fluids (blood, saliva, bronchial secretions, vomit, urine, etc.) expelled as a result of various physiological processes (vomiting, coughing, sneezing, etc.) and medical, dental, and veterinary procedures (suctioning the airway, placing nasogastric tubes, obstetrical procedures, surgery, dental procedures, etc.). Inasmuch as there are currently no standards for face/eye protection against biological hazards,[2] and research data is scant, recommendations for the proper selection of face shields for infection control must rely on currently available knowledge, the task to be performed and the anticipated risk associated with the procedure.[26] The selection of the most appropriate face shield model(s) will depend on the circumstances of exposure, other PPE used concurrently, and personal vison needs.[12] Face shields with single Velcro or elastic straps tend to be easiest to don and doff;[1] doffing can be accomplished with a single hand. In order to be efficacious, face shields must fit snugly[12] to afford a good seal to the forehead area[39] and also to prevent slippage of the device. Visors manufactured from acetate, propionate, and polycarbonate offer improved visual clarity and optical quality with the potential for less eye strain.[8, 9, 11] Visors that offer protection from UV light would be an important feature for individuals utilizing UV light sources (e.g., dental personnel). Face shields should be selected that have visors treated for anti-glare, anti-static, and anti-fogging properties. For improved protection from infectious agents, face shields should be, at a minimum, full face length with outer edges of the face shield reaching at least to the point of the ear, include chin and forehead protectors, and cover the forehead.[7, 12, 13] Brow caps or forehead cushions should be of sufficient dimensions to ensure that there is adequate space between the wearer's face and the inner surface of the visor to allow for the use of ancillary equipment (medical/surgical mask, respirator, eyewear, etc.). Cost-effective considerations include disposable face shields vs. reusable models and those that offer replaceable parts. Although some models of industrial face shields could be used for infection control purposes (e.g., in the event of face shield shortages), they generally tend to be more expensive, heavier and bulkier than face shields used for infection control purposes.

Proper use of face shields

Correct use of a face shield is dependent upon the indications for use. Appropriately fitted, indirectly vented goggles offer the most reliable practical eye protection from splashes, but face shields are considered an alternative to goggles for prevention of eye contamination with infectious agents.[12] Any additional protection afforded the eyes when protective eyewear (e.g., safety glasses or goggles) is combined with a face shield has not been thoroughly investigated, though the combination of a face shield and goggles has been espoused for use during invasive surgical procedures.[13] The combined use of some forms of protective eyewear with a face shield may impact visual clarity and limit peripheral vison to some extent and these effects must be taken into consideration before use. Goggles have also been reported to fog more than face shields.[39, 40] Also, if a respirator is required in conjunction with face shield use, goggles may not fit properly over the respirator.[12] Use of a face shield alone for eye, face, and mucous membrane protection from contamination by body fluids is likely insufficient and it has been recommended that in those situations where a face shield is used to protect against splash or splatter, a medical/surgical mask would also be indicated.[33] Face shields are not meant to function as primary respiratory protection and should not be used alone because aerosols can flow behind the visor,[16, 19, 21, 41] so a protective facemask (medical/surgical mask, N95 FFR, etc.) should be worn concurrently. In those instances where aerosolization of body fluids of infectious individuals is likely to occur (suctioning the airway, intubation, etc.), a respirator (e.g., N95 FFR, at a minimum) should be used in conjunction with the face shield.[37] Medical/surgical masks with integral visors should not be relied upon as optimal protection,[12] as evidenced by facial and ocular contamination in human and nonhuman research studies[17, 18, 20] and human ocular exposure to infectious agents when wearing these combination devices.[22, 23] The recommended PPE donning and doffing sequence for a face shield in healthcare settings should be followed (donning sequence is gown, protective facemask, face shield [or goggles] and gloves; the doffing sequence is the reverse) keeping in mind that it may vary according to the equipment needed for the particular hazard.[42] Although some models of industrial face shields could be used for infection control purposes (e.g., in the event of face shield shortages), they generally tend to be more expensive, heavier and bulkier than face shields used for infection control purposes.

Conclusions

Face shields are PPE that are commonly used as barrier protection for infection control purposes by numerous workers. There currently is no standard regarding face/eye protection from biological hazards and this deficit needs to be remedied as quickly as possible. Due to the lack of a good facial seal peripherally that can allow for aerosol penetration, face shields should not be used as solitary face/eye protection, but rather as adjunctive to other PPE (protective facemasks, goggles, etc.). Given the dearth of available data regarding the appropriate use of face shields for infection control, scientifically sound research needs to be conducted on the use of this form of PPE.

Acknowledgments

The author expresses his thanks to William Lindsley, PhD, Travis DiLeo, MS, and George Niezgoda of the National Institute for Occupational Safety and Health for their manuscript reviews and suggestions.

Disclaimer

The findings and conclusions in this report are those of the author(s) and do not necessarily represent the views of the National Institute for Occupational Safety and Health.

Are you interested in learning more about european hard hat? Contact us today to secure an expert consultation!