STRUCTURE
For more information, please visit our website.
Steel cable rubber conveyor belts are commonly used for transport of products at lengthy ranges and heavy loads which have high resistance. The steel cable conveyor belts are used also in high-speed transport at brief distances. These conveyor belts need only a very short take-up stroke.
The belt structure with its longitudinally ordered steel cables skeleton is resistant to fatigue because of flexing.
Thus, smaller diameter drive pulleys can be used to design equipment of smaller size. The steel wires are bonded with high level of adhesion to the fabric on their ground.
The rubber of the rubber conveyor belt with steel wires is therefore firmly attached to the steel cables and shockproof, enhancing the belt life. Steel cables are structured uniformly and have the same strain, which makes the belt upright and functional.
As the carcass doesn't have longitudinal yarns, the steel wire rubber conveyor belt carry more stuff within greater inclination.
CORD STRUCTURE
7×7 : Applied to low tension lines
7×19 : Applied to high tension lines used.
If you want to learn more, please visit our website haichuan.
Steel cord conveyor belts are widely used in high strength, long-distance and heavy load transportation of materials, and they are also used in high strength and short distance transportation of materials on special occasions. Steel cord conveyor belt construction mainly use steel core in carcass.
1. High tensile strength: The belts are suitable for large span, long-distance transportation of materials.
2. Small elongation in use: The belts need only a very short take-up stroke distance.
3. The small diameter of drive pulley: The belt body has a layer of longitudinally arranged steel cords as its skeleton, and thus is resistant to flex fatigue.Therefore, a drive pulley of smaller diameter can be used to make the equipment smaller.
4. High adhesion between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber used has the property of good adhesion with steel cords. Therefore, the rubber is tightly adhered to the steel cords and is resistant to shock and difficult to drop, so the rubber belts are long in life.
5. Even tension of steel cords: Because of advanced techniques in manufacturing, the steel cords are very evenly arranged and have the same tension, so the belts are well balanced in running and difficult to run awry.
6. Steel cord conveyor belt construction with Good trough ability: As the belt body has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from escaping.
7. Inspection of the belt: Users can use X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.
If you are looking for more details, kindly visit Steel cord conveyor belt for mining.