STAINLESS STEEL 422GENERAL CHARACTERISTICS OF STAINLESS 422
With better strength at higher temperatures, Stainless steel 422 is an appealing alternative to Stainless 403. It offers ductility and strength from room temperature to °F (649°C) and resists scaling and oxidation to °F (760°C).
CHEMICAL COMPOSITION OF STAINLESS STEEL 422
&#; Carbon 0.20-0.25
&#; Manganese 1.00 max
&#; Molybdenum 0.75-1.25
&#; Chromium 12.00-14.00
&#; Silicon 1.00 max
&#; Sulfur 0.03 max
&#; Nickel 0.40-1.00
&#; Tungsten 0.75-1.25
&#; Vanadium 0.20-0.50
&#; Phosphorus 0.04 max
&#; Iron balance
HEAT TREATMENT OF STAINLESS 422
&#; To anneal, heat to ° to °F (871° to 899°C), then slowly cool in furnace
&#; For stress relief, heat to ° to °F (593° to 621°C) before furnace or air cooling
&#; Harden by heating to ° to °F (° to °C) before oil quenching and tempering
APPLICATIONS OF STAINLESS STEEL 422
&#; Aircraft parts
&#; Steam and gas turbine components
&#; High heat components
MACHINABILITY OF STAINLESS 422
Comparable to 18-8 but easier to machine
&#; Help avoid galling with sharply ground tools
&#; Maintain consistent speed and feed
&#; Turning tools: 8-14° side rake
&#; Drilling: 140° point
&#; Threading: grind tools with 10-15° back rake
&#; Cobalt high-speed tools: turn at 90-120 sfpm, drill at 40-75 sfpm, mill at 70-120 sfpm, ream at 20-60 sfpm, roughing and finishing at 200-400 sfpm
Goto HPE to know more.
We are one of the preeminent manufacturers and suppliers of Duplex Stainless Steel 329 Round Bars. Immensely useful for construction industries, these bars are offered by us in various sizes and finishes to choose from. Complying the industrial norms, our round bars last for long duration and available in bulk quantities at most reasonable rates.
Duplex Stainless Steel 329 was one of the earliest duplex steel which is reflected in its higher permitted carbon content. Its resistance to pitting (PREN about 32) and to crevice corrosion is below that of super duplex steels, therefore use in seawater is limited. Exposure to moderate and high temperature and less rapid cooling may cause embrittlement.
Accordingly, design stress values in ASME II do not extend above 260°C for S. Impact values are high at room temperature. However, the proportion and orientation of ferrite in welds and base material may significantly affect toughness at subzero temperatures.
Duplex Stainless Steel 329 also conforms, or is similar to EN/DIN 1. and 00Cr25Ni5Mo2, SUS 329J1, AISI 329, UNS S, Brands SS44, SS , Din X8CrNiMo27-5, ASME SA268, ASTM A268, ASTM A511, SS 14 , SIS 14 and 453S
Duplex Stainless steel 329 can be used for heat exchangers, chemical tanks, refineries, shafts (marine, etc) pressure vessel parts, flanges, fittings & pipes for the oil and gas industries and offshore technology, paper industry, compressor parts and seawater desalination plants amongst many other applications.
Stock Sizes: Custom sizes available
Chandan
Steel World carries austenitic Stainless Steel grade 317 and 317L in stainless steel round bar per the American Society for Testing and
Materials (ASTM) Specification A276, A314 and A580 for Stainless Steel grade 317 and A182 for Stainless Steel grade 317L
STEEL BAR TYPE
STEEL BAR AMS
STEEL BAR ASTM
STEEL BAR FEDERAL
STEEL BAR CHARACTERISTICS
317 Steel BarA276
A182 QQ-S-763 Extra low carbon variation of T-317 for welded structures.
We are the dynamic, business-oriented organization, ranking among the utmost entities in providing 316 Round Bars. This round bar is manufactured utilizing the best quality steel & cutting-edge technology in accordance with the set international quality norms. The round bar offered by us is checked by our quality checker for ensuring its flawlessness. Our offered round bar is demanded in various industries for their seamless finish, high tensile strength & longer service life.
Features:
&#; Excellent strength
&#; Non-corrosive
&#; Easy installation
Other Details:
&#; Pharmaceutical
&#; Chemical
&#; Pulp and paper
&#; Marinet
&#; Textile
&#; Petroleum
&#; Mining
&#; Transportation
&#; Water filtration
&#; Architectural applications in corrosive regions
Other Informations:
&#; Laboratory benches and equipment
&#; Springs
&#; Heat exchangers
&#; Ball valves
&#; Compression fittings
&#; Hose fittings
&#; Threaded fasteners
&#; Hardware
&#; Pressure reducing valves
&#; Flanges
&#; Strainers and jewelry
&#; Coastal architectural railings
&#; Paneling and trim
&#; Tanks
&#; Storage vessels for corrosive liquids
&#; Quick couplings
&#; Sensor fittings
&#; Food preparation equipment
Bar Types Available:
&#; Round stainless steel bar
&#; Flat stainless steel bar (H.A.R.P.)
&#; Square stainless bar
Custom 450* UNS S
A martinsitic precipitation hardening steel, Custom 450© stainless steel offers high strength combined with excellent corrosion resistance similar to 304 stainless in corrosion resistance with moderate strength similar to that of 410 stainless. As with most precipitation hardened alloys, Custom 450© stainless has excellent transverse properties.
Used when ease of welding and brazing in fabrication is required. Custom 450©, unlike many precipitation hardening grades, Custom 450© can be used in the annealed condition.
Applications: Valve parts, Paper mills, aircraft and power generation, chemical processing, nuclear and space craft.
Heat Treatment: Solution heat treatment, heat at /f (/c cool to below 90f (32c) to allow material to fully martensite. Material can be air cooled, but should be rapidly quenched for best response to aging.
Aging: All solution treated materials: Condition H-900 4hrs and air cool. H-900 offers the best combination of ductility, strength and toughness. H- increases ductility but decreases strength.
Alloy 465 is a martensitic, age hard enable alloy. Alloy 465 is capable of ultimate tensile strength in excess of 250 ksi in the over aged (H 950) condition. By over aging Alloy 465 to the H condition, Alloy 465 obtains a superior combination of strength, toughness and stress corrosion cracking.
Alloy 465 is a martensitic, age harden able alloy. Alloy 465 is capable of ultimate tensile strength in excess of 250 ksi in the overaged (H 950) condition. By overaging Alloy 465 to the H condition, Alloy 465 obtains a superior combination of strength, toughness and stress corrosion cracking.
Availability
Alloy 465 is available as Bar (Round, Flat, Square), Wire, Strip, Billet. For all stock availability contact Sales.
Specifications
&#; AMS
&#; ASTM A693
&#; ASTM A564
&#; ASTM F899
&#; MMPDS-01
&#; UNS S
Additional Information:
&#; Pay Mode Terms
15-5 PH Plate
15-5 PH plate, or precipitation hardened, stainless steel plate is a high strength, ferrite-free alloy used worldwide. 15-5 PH plate displays excellent fatigue and wear-resistant properties and good resistance to corrosion. 15-5 PH is a ductile material that exhibits minimal distortion when subjected to heat treatments. These properties make 15-5 PH plates ideal for a wide range of applications, including those in the aerospace, chemical, petrochemical, metalworking and food processing industries.
The products 15-5 PH plate is used to manufacture include:
&#; Valves
&#; Fittings
&#; Shafts
&#; Fasteners
&#; Gears
15-5 PH plate is an ideal material for applications that require high fatigue and wear resistance coupled with good corrosion resistance. It is an economic material, as it is more cost-effective than high-nickel, non-ferrous alloys for most applications. At Altemp Alloys, we offer 15-5 PH plates in the BMS 7-240, ASTM-A-693 and AMS configurations. If you would like to inquire about pricing, please contact our team of experts.
15-5 PH STAINLESS STEEL BAR
15-5 is a variant of the older 17-4 chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600 degrees F. The 15-5 alloy was designed to have greater toughness than 17-4. This improved toughness is achieved by reduced delta ferrite content and control of inclusion size and shape.
Applications:
&#; Aircraft components
&#; High pressure corrosive fabricated parts such as valves
&#; Shafts
&#; Fasteners
&#; Fittings and gears
347 STAINLESS STEEL BAR
347 stainless is an austenitic stainless steel offering an excellent resistance to inter-granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 to O F. Alloy 347 alloyed with columbium-tantalum (referred to as niobium) allows good mechanical properties at high temperatures.
Applications:
&#; High temperature gaskets
&#; Rocket engine parts
&#; Expansion joints
&#; Aircraft collector rings
&#; Exhaust manifolds
&#; Chemical production equipment
ams E 15-5ph
&#; AVAIABLE SIZES UPTO 450 MM
Additional Information:
&#; Minimum Order Quantity: 100 Kilogram(s)
200 Nickel BarUNS N
Nickel 200, also known as UNS N, is considered commercially pure 99% wrought nickel, one of the toughest metals. Its characteristics include excellent mechanical properties, a low gas content, low vapor pressure, magnetic properties, and high thermal and electrical conductivity. These properties and its chemical composition make Nickel 200 fabricatable and highly resistant to corrosive environments. It is useful in any environment below 600° F, as well as highly resistant to corrosion by neutral and alkaline salt solutions. Nickel 200 also has low corrosion rates in neutral and distilled water, it can be hot formed to any shape and formed cold by all methods.
Industries that use 200 include:
&#; Aerospace
&#; Chemical
&#; Defense
&#; Food Processing
- See more at: http://www.nsalloys.com/products/nickel-alloy-bar/200-nickel-bar#sthash.qMbwMXRZ.dpuf
Pipe caps are made to cover pipe ends of various forms and serve as a protective measure. End Cap Pipe Fittings are mostly used to waterproof the connections. Additionally, they are employed to seal the extremities of hydraulic or pneumatic pipelines and tubes. They are utilized in the machinery, processing equipment, and plumbing systems for home, commercial, and industrial water supply lines. Additionally, they are installed on water pump lines with the express objective of eliminating air obstructions. Pipe caps are a significant class of pipe fittings that are in great demand.
Are you interested in learning more about astm a511 stainless steel hollow bar wholesale? Contact us today to secure an expert consultation!
Pipe End Caps are a particular kind of fitting that are mostly utilized to cover a pipe end. This prevents the entry of impurities such as water, dampness, dust, and others. Additionally, it aids in avoiding material damage. Devices called pipe end caps aid in protecting the pipe ends. They come in a variety of forms and sizes and are constructed from a variety of materials. End cap pipe fittings typically have a tear tab or strip to make removal simple. They assist in lowering pressure dips and maintaining the cleanliness of a pipe&#;s inside in addition to safeguarding the end.
Aluminum and steel are two materials that are frequently utilized in manufacturing. They are both extremely strong and bendable. Steel is more difficult to work with than aluminum. Monel Pipe End Caps are ideal for usage on components of high-volume manufacturing lines. For lighter-weight piping, particularly that which is flexible enough to be provided in coiled form, nickel alloy pipe end caps are occasionally utilized. Inconel Pipe End Caps are excellent for point-of-purchase displays, racks, shipment protection, dust coverings, and other finishing applications on metal items. Another common material for end caps is rubber. They are employed in many different processes, including as masking, temporary covering, and pumping.
The buyer should constantly consider the material of the fitting before choosing pipe caps since a wide range of materials are utilized to make pipe caps. Among the frequently utilized materials are:
Stainless Steel Pipe End Caps: ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1., DIN1., DIN 1., DIN 1.
Duplex & Super Duplex Steel Pipe End Caps: ASTM A 815, ASME SA 815 UNS NO S, S. UNS S, S. Werkstoff No. 1.
Carbon Steel Pipe End Caps: ASTM A234, ASME SA234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Alloy Steel Pipe End Caps: ASTM A234, ASME SA234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91
Nickel Alloy Pipe End Caps: ASTM B336, ASME SB336, Nickel 200 (UNS No. No), Nickel 201 (UNS No. N), Monel 400 (UNS No. N), Monel 500 (UNS No. N), Inconel 800 (UNS No. N), Inconel 825 (UNS No. N), Inconel 600 (UNS No. N), Inconel 625 (UNS No. N), Inconel 601 (UNS No. N), Hastelloy C 276 (UNS No. N), Alloy 20 (UNS No. N), Titanium (Grade I & II), Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.
Low Temperature Carbon Steel Pipe End Caps: ASTM A420 WPL3, A420 WPL6
Before purchasing pipe caps in bulk, the buyer should take into account a number of crucial criteria. The following crucial requirements must be taken into account:
NPT (National Pipe Thread) size: This characteristic is appropriate for caps with a round form when the item that has to be protected has a male NPT thread.
BSP (British Standard Pipe) size: This size choice is only appropriate for caps with a round form and a male BSP thread on the item to be capped.
Diameter: Only round caps and plugs may be made with this crucial size. The primary thread diameter is the most crucial factor to take into account when fittings have straight threads. However, when a cap, plug, or item to be capped has a tapered (NPT or BSP) thread, its size is not a crucial factor to take into account.
Shape: The size and shape of pipe caps are other crucial factors to take into account. distinct pipe caps have distinct features. Features include:
There are many various varieties of pipe caps, and the type varies depending on the use. The correct sort of pipe cap must be known by the customer since pipe caps differ according to their construction features. Pipe caps come in the following varieties based on their construction:
The threads on these caps are female. The thread, commonly known as an NPT, can be straight or tapered. often, plugs have a male thread, whereas caps often have a female thread. A threaded fitting called an ASME B16.11 threaded cap is often liquid or gas tight. Threaded Pipe Caps assist in resisting repeated tightening cycles that cause threads to loosen during drilling. Depending on the needs, a threaded end cap can be screwed or welded on a pipe.
These hats&#; tapering sides provide a snug fit. Some of these fittings have two different uses: as plugs or as caps. Male and female NPT threads, straight tubes and bars, and male straight threads all work well with tapered caps and plugs due to their versatility. These fittings have a tapered body to offer a solid friction fit and to make removal simple.
These caps have a somewhat square end and a circular shape. Rolling pipes and tubes are stopped as a result. When shipping expensive merchandise at work or on the job, anti-roll caps can be used to safeguard the ends of a shaft, tube, pipe, fitting, connector, screw, bar, or any other shape. They are a specially designed vinyl plastic cap with square ends to prevent rolling.
Pipe caps are essential protective measures for pipe ends, used to waterproof connections, seal hydraulic or pneumatic pipelines, and prevent material damage. They come in various forms and sizes and are made from various materials, such as aluminum, steel, nickel alloy, Inconel, rubber, and more. There are various types of pipe caps, including threaded, tapered, and anti-roll end caps. Threaded caps have female threads, while tapered caps provide a snug fit and can be screwed or welded on a pipe. Anti-roll caps have a slightly square end and circular shape, preventing rolling pipes and tubes from being obstructed. Mcneil instruments Inc. is one of the best Manufacturer, Supplier, & Exporter of End Cap Pipe Fittings in India.
For more information, please visit stainless steel heat exchanger tube.