The TC Oil Seal is a low-pressure dual lip radial seal a with garter spring to provide protection from contaminants. The rubber covered OD improves the OD sealing ability. The internal face of the steel case is not fully rubber covered. The additional dust lip protects the primary sealing lip against dust and other contamination. This seal can be used in polluted environments. To maximize performance over the lifetime of the seal an adequate lubricant should be applied between the two sealing lips.
Sanshi are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Julu county demeirui mechanical seal factory
PD oil seal and TC oil seal type are different. PD and TC can tell us that the models between them are bad, they are the codes that we distinguish between models.
The skeleton and spring of the oil seal are made of metal, and the main parts of the sealing lip are rubber. The oil seal can be produced with different rubber according to the environment, so as to meet the sealing performance and requirements. The most commonly used oil resistant rubber is NBR, and nitrile rubber is currently one of the most popular rubber seals and O rings. It can be said that it is the most widely used and lowest cost rubber seal. Commonly used in making oil seals are polypropionate rubber, silicone rubber, fluorine rubber and polytetrafluoroethylene.
For more information, please visit Rubber Pad.
TC oil seal is the name of oil seal. It is a kind of double lip oil seal with rubber completely covered with self tightening spring. Generally speaking, the oil seal often refers to the TC skeleton oil seal.
As for the letter PD in front of the oil seal, it means that the general manufacturer is used to express the oil seal. It is often expressed in short letters before the specification, as follows: W (no spring type), PD (low speed ordinary type), PG (high speed ordinary type), SD (low speed double mouth), DG (high speed double mouth) and so on. The specification of the oil seal is dxDxH (inner diameter X outer diameter X height) - millimeter.