dirttracker18 said:

No, it's your garage do what you want. If you are that cheap with your $20 000 plus garage then why put anything in there at all. Why even spend the money on preping the ground.

Just dump some concrete and when it sets start building.

Seriously, did you just say that?

View Details

Click to expand...

Actually I have about $50,000 in materials and concrete in my shop. None of that was for labor, I built it pretty much by my self. I didn't "over build" it. My neighbor hired out his concrete, 30' by 100" slab with rebar ala chingada to the tune of $25,000. I did my own excavation, set the forms, the re-bar around the perimiter top and bottom, the 8 pillar footings, the 6x6 welded wire mesh pulled tight. My cost for the concrete and a crew to place it was about $9,600. My place is a bit smaller, 40' by 64'. With the roughly 15K difference in cost for the concrete I was able to put in a shitload of insulation and a few nice windows and good quality insulated doors. My floor has a few hairline cracks. I don't care. I can heat mine for about $60.00/month. He can't afford to heat his and it's like an oven in there in the summer. He has no cracks in his floor. So what I'm saying is that sometimes you have to make a compromise. The last shop I built in '94 was done exactly the same way. It has a few small cracks as well. They have not been a problem in either building.

You are welcome to come and visit and check out either of my buildings. I'd be proud to give you the nickel tour anytime.

Actually I have about $50,000 in materials and concrete in my shop. None of that was for labor, I built it pretty much by my self. I didn't "over build" it. My neighbor hired out his concrete, 30' by 100" slab with rebar ala chingada to the tune of $25,000. I did my own excavation, set the forms, the re-bar around the perimiter top and bottom, the 8 pillar footings, the 6x6 welded wire mesh pulled tight. My cost for the concrete and a crew to place it was about $9,600. My place is a bit smaller, 40' by 64'. With the roughly 15K difference in cost for the concrete I was able to put in a shitload of insulation and a few nice windows and good quality insulated doors. My floor has a few hairline cracks. I don't care. I can heat mine for about $60.00/month. He can't afford to heat his and it's like an oven in there in the summer. He has no cracks in his floor. So what I'm saying is that sometimes you have to make a compromise. The last shop I built in '94 was done exactly the same way. It has a few small cracks as well. They have not been a problem in either building.You are welcome to come and visit and check out either of my buildings. I'd be proud to give you the nickel tour anytime.

For more information, please visit Dashang.

The Differences Between Wire Mesh Panels and Rebar

admin 05/22/ 0 Comments

05/22/ 0 Comments uncategorized

What is wire mesh?

Wire mesh is manufactured from cold-reduced, deformed steel and is laid out in a series of square panels. When used in concrete projects, the mesh panels have ridges that help form the attachment to the concrete structure. The wire mesh can add significant strength to the concrete and ensure optimal flexibility for a range of architectural applications.

What is rebar?

Rebar is also made from steel but is generally laid out in larger squares than you would ordinarily find in wire mesh panels. Rebar is often used when cracking occurs in a concrete structure, as a reinforcement material.

Which offers the best value for my project?

 

Wire mesh is more cost-effective

  One of the foremost considerations in most structural projects is the total cost for the material. Wire mesh panels are more cost-effective. Because mesh arrives at the site in a roll, there are fewer labor expenditures to consider during installation.  

Rebar can be stronger but might be considered overkill for projects

  While rebar is often stronger than wire mesh, you might find that the level of strength provided by rebar is overkill for most projects.

Wire mesh can offer greater flexibility

  Wire mesh is designed to offer high levels of flexibility when combined with concrete for structural projects. Contractors often find that the smaller squares of the mesh and the thinner steel material can be used in a great range of applications compared with bulkier rebar. Working with a qualified manufacturer of

When choosing a material for your facility, it helps to know the value of the leading options. Two of the most popular construction materials are rebar and wire mesh panels . To help guide you regarding the differences between these two options, we&#;ll address the subject and highlight which product is best suited for your applications.Wire mesh is manufactured from cold-reduced, deformed steel and is laid out in a series of square panels. When used in concrete projects, the mesh panels have ridges that help form the attachment to the concrete structure. The wire mesh can add significant strength to the concrete and ensure optimal flexibility for a range of architectural applications.Rebar is also made from steel but is generally laid out in larger squares than you would ordinarily find in wire mesh panels. Rebar is often used when cracking occurs in a concrete structure, as a reinforcement material.One of the foremost considerations in most structural projects is the total cost for the material. Wire mesh panels are more cost-effective. Because mesh arrives at the site in a roll, there are fewer labor expenditures to consider during installation.While rebar is often stronger than wire mesh, you might find that the level of strength provided by rebar is overkill for most projects. Heavy-duty wire mesh can offer the required level of durability while limiting your costs considerably.Wire mesh is designed to offer high levels of flexibility when combined with concrete for structural projects. Contractors often find that the smaller squares of the mesh and the thinner steel material can be used in a great range of applications compared with bulkier rebar. Working with a qualified manufacturer of wire mesh panels can help your organization reduce its mesh costs and ensure you find the right product for your applications. Our experts at California Wire Products are committed to helping each client achieve full value when sourcing wire mesh material and our service is designed for both convenience and optimal levels of communication. To discover more about the many benefits that wire mesh can bring to your upcoming projects, please call our team at California Wire Products today.

If you are looking for more details, kindly visit Epoxy coated wire mesh.