Galvanized Wire Ropes - Stronger & Corrosion Resistant

Galvanized steel wire rope

Want more information on drawn galvanized steel wire rope? Feel free to contact us.

Galvanized steel wire ropes are constructed of galvanized wires which are dipped in the tank containing molten zinc to form a thick layer of zinc coating before the wire is drawing through dies. Then these galvanized wires are drawn to reduce diameter and increase tensile strength. At the same time, zinc coating bonding to steel wires is compressed to form a more excellent layer to protect the steel form corroding.

Feature:

• Cheaper than stainless steel wire ropes.
• Higher break strength than stainless steel.
• Greater fatigue strength.
• Excellent corrosion resistant.
• Less wear than other materials.
• Galvanized coating serves as lubricant to reduce friction.
• Remain ductile over long periods of working.
• Easier to inspect for corrosion damage.

Application

• Winch ropes.
• Garage door cable.
• Security cable.
• Catenary wire rope.
• Various general engineering applications.

Details

• Standard: DIN, EN, ASTM, BS, JIS, etc.
• Diameter: from 0.15mm to 50mm.
• T/S: 1570, 1670, 2770, 1870 or 1970Mpa.
• Packing: wooden box, bagging or other custom packing.

Construction:

GWR 6 × 7 FC

GWR 7 × 7 WSC

GWR 6 × 19 FC

GWR 7 × 19 WSC

GWR 6 × 19 FC & Seale

GWR 6 × 19 IWRC & Seale

GWR 6 × 25 FC & Filler wire

GWR 6 × 25 IWRC & Filler wire

GWR 6 × 24 FC

GWR 6 × 26 IWRC & WS

GWR 6 × 29 FC & Filler wire

GWR 6 × 29 IWRC & Filler wire

GWR 6 × 31 FC & Seale

GWR 6 × 31 IWRC & Seale

GWR 6 × 36 FC & Seale

GWR 6 × 36 IWRC & Seale

GWR 6 × 37 FC & Seale

GWR 6 × 37 IWRC & Seale

GWR 19 × 7 WSC

GWR 6 × 47 IWRC & WS

GWR 8 × 26 IWRC & WS

GWR 8 × 36 IWRC & WS

GWR 6 × 29 Fiber infilled

GWR 6 × 36 Fiber infilled

Inquiry for Our Product

For more information, please visit wire rope and cable manufacturers.

Shandong Xingying Environmental Energy Technology Co. LTD
E-mail: sales@goldoxwiremesh.com

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

Full Name

*

E-mail Address

*

Country Code

*

*

Your Website

Message

*

How Are Wire Ropes Produced?

Wire ropes can be seen everywhere around us, they are made of strands or bundles of individual wires constructed around an independent core, suitable for construction, industrial, fitness, commercial, architectural, agricultural, and marine rigging applications.

In this article, we will shortly describe how to produce the wire ropes.

Wire rod

Wire rod is made from high carbon steel wires(0.35 to 0.85 percent carbon) in a hot rolling process of a required diameter, usually from 5.5mm to 8 mm.

Surface treatment

Descaling dust and rust from the outer surface of the wire rod to facilitate the drawing process.

First Drawing

Wire rod is drawn to the required diameter by the 1st drawing machine after descaling dust and rust, adding mechanical properties suitable for application.

Patenting

The first drawn wires are transformed into a heat treatment furnace to obtain the required microstructure and to facilitate drawing.

Second Drawing

The patented wire is drawn for the final required size of wire.

Stranding

Positioning the wires different or the same size lay in multiple layers and same direction, or cross lay and diameter is maintained by one-third of the rope size.

Closing

After completing the set of strands, these strands are laid on a core (Fiber or Steel ) which produces the rope of the required diameter.

So in theory, it is very simple to manufacture wire ropes. However there are many more details that must be closely monitored and controlled, and this requires time and experienced personnel since it is a super complicated project you cannot imagine.

If you want to get more useful knowledge about producing wire ropes, you can contact us by email at info@hilifting.com. We will be glad to share with you more useful information.

If you are looking for more details, kindly visit heavy duty steel wire rope.