Your home is your sanctuary, a canvas upon which you can paint your personal style and preferences. When it comes to upgrading your home&#;s exterior, choosing the right stucco finish is like selecting the perfect frame for a work of art. Enter modern smooth stucco finishes &#; a contemporary twist on a timeless classic that can transform your home&#;s appearance. In this guide, we&#;ll embark on a journey to explore the world of modern smooth stucco finishes, unveiling the options that can elevate your home&#;s aesthetic to new heights.
Paper Backed Diamond Mesh Lath
It provides protection against wet areas during stucco curing. Paper-Backed Lath comes in flat and self-furring configurations to accommodate your installation needs.
Optional 60-minute Grade-D paper available for higher weather resistance and durability.
Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives.
Welded Wire Lath
A superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB) metal lath is used behind stone, traditional stucco, and tile installations as a code compliant weather resistant barrier.Woven Wire LathApplication(s): Stone Veneer, Stucco
Product Parameters
Material: G60 Galvanized Steel
Type 1, Grade-D, Style 2 Paper
Packaged: 25 bundles or 250 pieces per pallet
Expanded Metal Lath Specifications
Weight per Square Yard
(lb/yd2)
Sheet Size
Pieces/Bundle
Yards/Pallet
1.75
27"×96"
10
500
2.5
27"×96"
10
500
3.4
27"×96"
10
Wusheng Hardware supply professional and honest service.
500
Storage:
All stored materials shall be kept dry and out of the weather. Materials shall be stacked off the ground,supported on a level platform, and protected from the weather and surface contamination per ASTMC847 & C. Paperbacked lath should not be stored outside where ran water can become trapped between sheets, thereby oxidizing the metal.
Category
Flat Diamond Metal Lath
Flat diamond metal lath is manufactured by slitting and stretching galvanized steel sheets to form small openings, thereby allowing the plaster keys to be bonded to the lath and offering better crack resistance and higher strength. Each sheet has square ends and smooth parallel edges for fast, easy handling and installation.
Flat diamond metal lath is used as plaster base and reinforcement on almost all type of walls, ceilings, over wood or steel framing, flat or curved surfaces. The large number of openings provide better stucco bonding property.
Paper-Backed Lath
Self-Furring Dimpled Metal Lath
Self-furred dimpled metal lath is manufactured with evenly spaced indentations that hold the metal lath 1/4" away from the surface to be plastered to allow the plaster or stucco to be embedded more thoroughly into the lath and provide excellent mechanical bonding over the surface to be plastered.
Self-furring dimpled metal lath is extensively used in plaster works and serves as plaster reinforcement over interior masonry walls and in steel column fireproofing, or functions as a reinforcement for base coat in ceramic tile works.
Self-furring dimpled metal lath is also available with asphalt paper backing.
Self-Furring V-Groove Metal Lath
Rib Lath With High Strength and Great Plaster Bonding Capacity
Rib lath is manufactured by punching and profiling galvanized steel sheet or stainless steel sheet.
Rib lath, also known as expanded ribbed lath, has V-ribs to offer an increased tensile strength and give a uniform plastering depth over a large coating area. Compared with common metal lath, V ribs provide added support capacity and its unique structure offers better permeability, thereby delivering greater plaster bonding and fixing properties.
It is extensively used in plastering works on walls and suspended ceilings and serves as plaster base for building construction.
Rib lath without paper
Kraft paper-backed rib lath
Rib Lath Specification Table
Type Code Rib Depth Rib Distance Sheet Size 3/4" High Rib Lath (High Rib Stay Form) HR 3/4" 98 27" × 97" HR3 19-20 mm 100mm 200 mm width HR4 19-20 mm 100mm 300 mm width HR5 19-20 mm 100mm 400 mm width HR6 19-20 mm 100mm 500 mm width HR7 19-20 mm 100mm 600 mm width HR8 19-20 mm 100mm 700 mm width 3/8" Middle Rib Lath MRB5 10mm 150mm 600 x - mm MRB7 10mm 100mm 600 x - mm MRB9 10mm 75mm 600 x - mm 1/8" Flat Rib Lath FRB5 4mm 150mm 600 x - mm FRB7 4mm 100mm 600 x - mm FRB9 4mm 75mm 600 x - mmDetailed Photos
Paper-backed lath is a kind of metal lath with asphalt saturated kraft building paper applied on the back to control moisture, air flow and reduce air infiltration, thereby providing improved energy efficiency. It is easy to install and is an ideal choice for serving as a base for stone, ceramic tile and traditional stucco.The paper is waterproof. It provides sheathing protection against moisture during curing and forms a vertical surface behind the exterior wall cladding (stucco, brick, siding, etc.) to allow moisture safely drain out of the wall system.Self-furring v-groove metal lath is manufactured with 1/4" deep grooves and 5 grooves per sheet. These grooves are spaced 6" on the center along the length of the sheet and allow a thorough embedment into and behind the lath for superior mechanical bonding.Self-furring v-groove metal lath is easily shaped for curved or contoured surfaces. It helps maintain consistent plaster depths and eliminates the need for added furring strips. To maintain the furring characteristics of v grooves, fasteners must be applied within the v-cavity.Self-furring v-groove metal lath is widely used in plastering over surfaces such as concrete, cement board, column fireproofing, masonry surfaces as well as replastering over old surfaces. In addition, self-furring v-groove metal lath is available with asphalt paper backing.Rib lath without paper has herringbone mesh patterns and 7 longitudinal solid steel ribs with a depth of 3/8" at an interval of 3-7/8" across the sheet.Rib lath provides a maximum span of 24" on center. It can be used both vertically and horizontally to provide superior strength and exceptional rigidity. It is widely used in ceiling, wall and column plaster works.Compared with rib lath without paper, kraft paper-backed rib lath not only provides superior strength and exceptional rigidity, but also limits the loss of plaster when being applied on open framing.
Packaging & Shipping
Application
If you want to learn more, please visit our website SMOOTH STUCCO WIRE MESH oem.